4-channel oscilloscope
Art. No. W070 500 040
The digital 4-channel oscilloscope is used to measure up to 4 signals and variables simultaneously (e.g. 4-cylinder engine). It features the same equipment as the 2-channel oscilloscope, but also contains:
- Small crocodile clip red/black (1 pc.)
- 20:1 divider/attenuator (2 pcs.)
- Secondary ignition alligator clip with cable (2 pcs.)
- BNC test cable (4 mm) (2 pcs.)
- Multimeter test prod red/black (1 pc.)
Equipment features
Wide range of measurement of voltage, current, frequency, duty factor, e.g.:
- Actuators – injection nozzles, injectors, EGR valves
- Ignition systems (conventional & distributorless) – primary + secondary sides
- Starter and charging circuit measurements – without removal of components
- Sensors – ABS, crankshaft, camshaft, intake manifold pressure, knock sensor, Hall-effect sensor, air-mass meter, lambda sensors
- Relative compression check – without removal of components
- NEW: Bigger clip-on current probe for current measurement up to 600 A
- Measurement of high-speed signals possible (e.g. CAN bus, MOST bus, LIN bus systems)
NEW: now measurement on Flex-Ray Bus possible - NEW: Incl. Ignition coil test rod allows a direct measurement of the secondary ignition voltage at the single spark coil test cables or coil on plugs without removing the coil, incl. connecting cable
- NEW: Incl. fuse test adapter set for current measurement directly at the fuse plug-in slot
Simple functions
- Saving and printing of the display or measurement.
NEW: larger memory - Simple online updating – lifelong guarantee
- Colour guidance system for improved allocation of cables for mixup-free measurement
Extensive automotive engineering menu for simple, fast measurement. Comprises the following components:
- Reference diagram of the measured component
- Technical information on the component
- Detailed connection help
- Automatic setting of the correct measurement range
This special features saves time and helps you to concentrate on the essentials.
Technical data
Number of channels | 4 |
Frequency range | 20 MHz DC |
Scanning frequency | 400 MS/s |
Resolution | 12 bits |
Measurement ranges | ± 20 mV to 50 V |
Test range | 5 ns/div to 5.000 s/div |
Number of time ranges | 25 |
Measuring mode | AC / DC |
Trigger mode | Auto / Normal / Einzeln |
Power supply | via USB |
Interface | USB 3.0 (USB 2.0 compatible) |
Approvals | CE / VDD / LVD WEEE etc. |
Input resistance | 1 MΩ |
Product information